ND GRAFFITI SHIELD™
ND GRAFFITI SHIELD™ - Tough Graffiti Protective Top-coat over ONE COAT™
Schools | Walls | Fences | Highway sound barriers Commercial buildings | Playgrounds | Park district facilities | Sports stadiums | Street Signs | Siding
ND GRAFFITI SHIELD™
Price range: $49.00 through $494.00
From $0.35 /sq. ft.
Main Benefits:
Using both ONE COAT™ as the primer, and ND Graffiti Shield™ create our ND Graffiti Shield System
- Available in Glossy and in Satin/Matte Version.
- Prevents Graffiti Damage to Sealed Surfaces.
- Can be Installed on Almost Any Surface of Object with ONE COAT™ as the base.
- Very Low VOCs: compliant with California VOC Regulations.
- Exceptional Durability and Resistance To Staining.
- Does Not Attract Soils and Dust.
- Water Based: Very Low Odor, Easy Cleanup.
- Warranted For 5 years*
Remove graffiti with our DISAPPEAR Organic Graffiti/Adhesive Remover™
🏠 Floor Surface Treatment Selector
Find the perfect non-slip protection solution for your surface
Q1: Floor Surface needing non-slip protection
Q2: Area to be covered
Q3: Do you want to add ND AGGREGATE?
Traction grains e.g. for swimming pools, entrances, exterior walkways, etc.
🎯 Recommended Product
Graffiti Protection Selector
Find the right ND Graffiti Shield kit for your surface
Q1: Surface needing protection
Recommended Product
Surface Type:
Coverage Area:
Add Remover:
Product Recommendation:
The substrate must be first primed with ONE COAT™ Water Based Primer/Sealer/Finish in sufficient quantity so that it is visible and can be felt on the surface. After it is dry to the touch apply ND GRAFFITI SHIELD™ by spray (airless sprayer with 0.015 or 0.013 tip at about 300-500 PSI is recommended for most large painted and all porous surfaces; low pressure hand pump sprayer at about 35 PSI could be used on very porous surfaces). The application should be thin and ND GRAFFITI SHIELD™ should appear water clear when applied. THE GRAFFITI SHIELD SYSTEM™ is a total of 4 separate coats of ND GRAFFITI SHIELD™ over the base application of ONE COAT™. Each coat must be dry to the touch before next coat is applied. Drying time may vary between few minutes to an hour depending upon the weather, humidity and ventilation.
THE GRAFFITI SHIELD SYSTEM™ should be used after 96 hours which is the cure time. You can protect the wall while it is curing by covering it with a drop cloth or securing the area. Should cleaning be necessary before 96 hours, reapply ND GRAFFITI SHIELD™ to the needed areas only. Do not allow this product to freeze and do not use it in freezing temperatures. However, once it is applied and cured, freeze/thaw cycles will have no effect on proper product performance.
Graffiti Removal Made Easy
Remove new graffiti from THE GRAFFITI SHIELD SYSTEM™ in 24 hours or less for better results. Use our DISAPPEAR Organic Graffiti/Adhesive Remover™ – apply to area and allow it to soak on graffiti for 5 minutes to about 15 minutes and flush with water, clean with a soft cloth, or powerwash the area. When necessary, touch up cleaned areas with a light coat of ND GRAFFITI SHIELD™.
Please test this product on a small inconspicuous area before proceeding with the job.
THE GRAFFITI SHIELD SYSTEM™ should be used after 96 hours which is the cure time. You can protect the wall while it is curing by covering it with a drop cloth or securing the area. Should cleaning be necessary before 96 hours, reapply ND GRAFFITI SHIELD™ to the needed areas only. Do not allow this product to freeze and do not use it in freezing temperatures. However, once it is applied and cured, freeze/thaw cycles will have no effect on proper product performance.
Graffiti Removal Made Easy
Remove new graffiti from THE GRAFFITI SHIELD SYSTEM™ in 24 hours or less for better results. Use our DISAPPEAR Organic Graffiti/Adhesive Remover™ – apply to area and allow it to soak on graffiti for 5 minutes to about 15 minutes and flush with water, clean with a soft cloth, or powerwash the area. When necessary, touch up cleaned areas with a light coat of ND GRAFFITI SHIELD™.
Please test this product on a small inconspicuous area before proceeding with the job.
1. Porous materials such as concrete, brick, blocks, stucco:
– In most cases, you will need to apply 2 separate coats of ONE COAT™ according to our directions. The approximate coverage is about 330 sq. ft. per gallon for two coats.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 250 sq. ft. per gallon for all 4 coats.
2. Semi-porous materials such as indoor/outdoor house paint, wood:
– You need to apply 2 separate coats of ONE COAT” according to our directions. The approximate coverage is about 660 sq. ft. per gallon for both two coats.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq. ft. per gallon for all 4 coats.
3. Non-porous materials such as metals, plastics, non-porous paint:
– You need to apply one single coat of ONE COAT™ according to our directions. The approximate coverage for this coat is about 2000 sq. ft. per gallon.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq. ft. per gallon for all 4 coats.
The best method to determine the spread rate for these products on your material is to pre-test them on a small inconspicuous area according to our Directions. Our estimates should not be relied on to be 100% accurate for your application. Please read our Privacy Policy, Terms & Conditions for important details.
– In most cases, you will need to apply 2 separate coats of ONE COAT™ according to our directions. The approximate coverage is about 330 sq. ft. per gallon for two coats.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 250 sq. ft. per gallon for all 4 coats.
2. Semi-porous materials such as indoor/outdoor house paint, wood:
– You need to apply 2 separate coats of ONE COAT” according to our directions. The approximate coverage is about 660 sq. ft. per gallon for both two coats.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq. ft. per gallon for all 4 coats.
3. Non-porous materials such as metals, plastics, non-porous paint:
– You need to apply one single coat of ONE COAT™ according to our directions. The approximate coverage for this coat is about 2000 sq. ft. per gallon.
– You need to apply 4 separate coats of ND GRAFFITI SHIELD™ according to our directions. The approximate coverage is about 500 sq. ft. per gallon for all 4 coats.
The best method to determine the spread rate for these products on your material is to pre-test them on a small inconspicuous area according to our Directions. Our estimates should not be relied on to be 100% accurate for your application. Please read our Privacy Policy, Terms & Conditions for important details.
